HT ICOM IC V 80 Singel Band

• Frequency coverage : * Guaranteed range 144– 148MHz • Type of emissions : F2D/ F3E ( FM) • No. of memory Ch. : 207 ( incl. 6 scan edges and 1 call) • Operating Temp. range : – 20Ú C to + 60Ú C; – 4Ú F to + 140Ú F ( Radio only) • Frequency stability : ± 2.5ppm ( – 20Ú C to + 60Ú C) at 25Ú C • Power supply : 7.2V DC requirement • Current drain ( at 7.2V DC) : Tx High ( 5.5W) 1.4A typical Rx Max. audio 310mA typ. ( Internal SP, 16© load) 180mA typ. ( External SP, 8© load) Stand-by 65mA typical Power save 20mA typical • Antenna impedance : 50© ( BNC) • Dimensions ( W× H× D) : 58 × 112 × 30 mm; ( Projections not included) 29D32 × 413D32 × 13D16 in • Weight ( approx.) : 140g; 4.9oz ( without battery pack) 360g; 12.7oz ( with BP-264 and Ant.) • Output power ( at 7.2V) : 5.5/ 2.5/ 0.5W ( High/ mid/ low) • Max. freq. deviation : ± 5.0kHz/ ± 2.5kHz ( Wide/ narrow) • Spurious emissions : Less than – 60dB • External microphone : 3-conductor 2.5( d) mm ( 1D103) / 2.2k© connector • Sensitivity : 0.14¼ V typical ( at 12dB SINAD) • Squelch sensitivity : 0.1¼ V typical ( threshold) • Selectivity : 70dB/ 50dB typical ( Wide/ narrow) • Intermodulation : 70dB/ 65dB typical ( Wide/ narrow) • Spurious and image : 75dB typical rejection • Audio output power : 750mW typ. ( Internal SP, 16© load) ( at 10% distortion) 450mW typ. ( External SP, 8© load) • External speaker : 3-conductor 3.5( d) mm ( 1D83) / 8© connector GENERAL SPECIFICATIONS TRANSMITTER RECEIVER All stated specifications are subject to change without